You must have javascript enabled to use metaldetectori.com !

Hand Held Metal Detector

Security Detector Adjustable Sensitivity Detector

USD $19.05

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: Outdoor Adventure-TYPE A-Black-0ndf This site contains affiliate links for which we may be compensated Business & Industrial / Test, Measurement & Inspection / Test Meters & Detectors / Metal Detectors

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
MD303B和MD3003B1 are only different in appearance and have the same function
Advantages of the product: this detector is applicable to airport, station, wharf, customs, public security, border defense, security department, sports field security inspection or any other occasions where you need confidentiality and security. When metal is detected, it makes a sharp sound and emits light. It can also be used for precious metal detection, such as gold and silver jewelry
Product technical characteristics:
It is simple and convenient to use, without adjustment, with high and low sensitivity. The alarm mode includes sound and vibration. It has the sound or vibration prompt function for startup and shutdown. When the battery runs out, there is an automatic continuous sound or vibration alarm, and there is an external charging jack
Test distance of metal objects: pin 10mm, 1 yuan coin 60mm, 6-inch wrench 120mm
General features of the product:
Startup detection:
Turn on the power switch and hear the "click" sound for about 3-5 seconds, which means that the power has been turned on, the self-test time is completed, and it can be used normally,
At the same time, the green light is on. If the green light is not on, it means that the battery is not installed or the battery is in poor contact; In case of continuous sound or continuous vibration or no shouting, the meter
If the battery is no longer available, replace it with a new one
Selection of sound and vibration transfer switch:
Press the yellow button switch, and the alarm mode is vibration. Release the yellow button switch, and the alarm mode is sound
High sensitivity test:
After the power supply is turned on, high-sensitivity detection can be carried out. Hold the handle to scan the detection surface around the tested object. It will be triggered when there are metal objects
Alarm sound or vibration occurs, and the green light changes to red light; Stop scanning, the alarm sound or vibration will stop, and the red light will change to green.
Low sensitivity test:
If it is necessary to remove the small objects in the metal objects, press and hold the low sensitivity switch to scan the surroundings of the measured objects. There are
When the metal object is used, the alarm sound or vibration will be generated, and the green light will turn into red light; Stop scanning, the alarm sound or vibration stops, and the red light changes
It is a green light. Since the sensitivity is reduced by more than 5 times, the measured metal objects are generally large
Sensitivity adjustment:
If the detection distance fails to meet the specified requirements or the sensitivity is too high to cause instability, or the sound is generated without metal scanning to the human body; or During vibration, the sensitivity shall be adjusted. Put the sound and vibration transfer switch in the "release" state and use a small slotted screwdriver
Extend it through the small hole on the handle of the detector and rotate it anticlockwise to make sound, then rotate it anticlockwise to make no sound, and then rotate it clockwise
Turn for half a turn until the sensitivity meets the requirements
matters needing attention:
Don't forget to turn off the power after use. Take out the battery after long-term use. When the probe is fixed against the metal object, it will not make sound or vibration, but
The sound or vibration is generated when the metal object is swept. Please turn off the power switch when charging. Do not use it
Power supply: 6f22 9V battery (excluding battery)
Product size: 410x85x45mm
Product weight: About 320G (without battery)
Standard configuration: bare watch (no battery inside), leather case, battery, manual,

Returns Accepted for this item if it's within 30 Days

Hand Held Metal Detector Security Detector Adjustable Sensitivity Detector
See more
Price type
IN STOCK OUT STOCK