You must have javascript enabled to use metaldetectori.com !

Kit Pulse Induction Metal Detector

Clone Pi-w Module With Box And Connectors

USD $45.00

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Business & Industrial / Test, Measurement & Inspection / Test Meters & Detectors / Metal Detectors

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
Ready-made module of the impulse metal detector CLONE PI-W complete with a plastic case and connectors for connecting the coil and battery. The controller is programmed, the board is checked, the speaker and buttons are soldered! Kit includes:
  • Soldered and tested metal detector board Clone PI-W
  • Plastic case for metal detector board (The holes for buttons, indicators and connectors are not drilled. You mark and drill all the holes in the case yourself)!
  • Connector GKS 6-2 for connecting the coil
  • Socket and plug for power supply.
  • Instruction in English!
  • Specifications
  • Coin detection depth, to 25 - 28 cm 
  • Depth of detection of large objects - 100 - 150 cm 
  • Depth of detection of coin 25mm - 20 - 25 cm
  • Supply voltage -12 V 
  • Current consumption - 90 mA 
  • Display Type, LED / Audible 
  • Board dimensions, 85 X 55 mm 
  • Video review of this metal detector module Clone PI W - https://youtu.be/QubfYlHwTA8 Making a search coil ...:::PRODUCTION OF SENSOR:::... WE MAKE THE COIL ACCORDING TO THE DATA IN THE TABLE. WINDING WIRE WE USE DIAMETER 0.40-0.65MM. FROM COIL TO BOARD STRANDED COPPER WIRE 0.75 - 1.5 SECTION. THE WIRE FROM THE COIL TO THE BOARD WHEN CHECKING IS NOT CLOSE TO 35CM, HOW IT WILL WORK, YOU CAN EXPERIMENT WITH DIFFERENT PLUGS. INITIALLY WE MAKE WITHOUT PLUGS, THE ENDS OF WIRE CONNECTIONS WITHOUT ANY TWISTS, MUST BE BRAZED. PLUG IF YOU PUT - PUT NEAR THE BOARD IN NO EVENT DO IT NEAR THE COIL, THE RANGE, SENSITIVITY AND STABILITY OF THE TUNING WILL DEPEND ON THIS. THE COIL IS NOT SHIELDED!!! THE CABLE FROM THE BOARD TO THE SENSOR MUST ALSO BE UNSHIELDED - A SIMPLE NETWORK OR AUDIO CABLE. THE COIL SHOULD BE TESTED AWAY FROM FOREIGN METAL OBJECTS, CAN BE HANGED IN THE MIDDLE OF THE ROOM OR PUT ON A CARDBOARD BOX, AWAY FROM ELECTRIC APPLIANCES, THEN IT WILL BE MORE LIKELY TO SET TO MAXIMUM SENSITIVITY. IMPORTANT - THE FINISHED VERSION OF THE SENSOR MUST BE SEALANT FROM MOISTURE. ...:::POWER SUPPLY TO INSTRUMENT:::... WE SUPPLY A 12 VOLT BATTERY FROM THE MOpedE FROM THE UNINTERRUPTED FROM THE SCREWDRIVER, ETC. PARAMETERS OF SEARCH COILS OF PULSE METAL DETECTORS Diameter Sensor Form Quantity      Turns Size           wire Inductance resistance        coils 120 mm round 36 0 0.40 mm / 0.14 mm 2 405 m H 1.9 Ohm 150 mm round 31 0 0.40 mm / 0.14 mm 2 394 m H 2.0 Ohm 175 mm round 28 0 0.40 mm / 0.14 mm 2 387 m H 2.1 Ohm 200 mm round 26 0 0.40 mm / 0.14 mm 2 406 m H 2.2 Ohm 250 mm round 22 0 0.40 mm / 0.14 mm 2 380 m H 2.3 Ohm 300 mm round 20 0 0.50 mm / 0.20 mm 2 390 m H 1.6 Ohm     400 mm round 17 0 0.50 mm / 0.20 mm 2 396 m H 1.8 Ohm 500 mm round 15 0 0.50 mm / 0.20 mm 2 400 m H 2.0 Ohm 1.0 x 1.0 m square 10 0 0.66 mm / 0.34 mm 2 406 m H 2.0 Ohm 1.4 x 1.4 m square 8 0 0.66 mm / 0.34 mm 2 387 m H 2.2 Ohm 1.8 x 1.8 m square 7 0 0.80 mm / 0.50 mm 2 398 m H 1.7 Ohm Search coils, starting with a diameter of 400mm and more, are recommended to be wound with a stranded wire with a cross section of 0.5-0.75mm2 (do not confuse with a wire diameter of 0.5-0.75mm.) There is a tuning resistor (19 turns) on the board. Its purpose is to balance the Operational Amplifier. This is best done with an oscilloscope, but you can also do it manually. You can set the barrier to the 1st LED and use the trimmer to achieve maximum sensitivity of the device with minimal distortion. After each adjustment, it must be reset by pressing the Zero button. (the assembled boards are all balanced (tuned) by the oscilloscope)

    Returns Accepted for this item if it's within 30 Days

    KIT Pulse Induction Metal Detector Clone PI-W module with box and connectors
    See more
    Price type
    IN STOCK OUT STOCK